云杉八齿小蠹Ips typographus L.虚拟模型构建方法研究

本文以云杉八齿小蠹Ips typographus Linnaeus为例,经标本选取,观察虫体整体形态,绘制整体结构草图,电子显微镜观察局部、得到局部数字图像,分别建立虫体每一部分的高精度细节。把模型每部分拼装在一起组成整体模型,构建出了云杉八齿小蠹三维虚拟昆虫数字化模型。     

The relationship between perceptions of an innovative environment and creative performance in an online synchronous environment

This study focused on the relationship between perceptions of an innovative environment and creative performance in a web-based synchronous environment. A total of 160 sophomores and juniors from the National Taiwan Normal University participated in a learning activity consisting of a pretest and posttest quasi-experimental design. Pearson’s correlation coefficients and analysis of covariance (ANCOVA) were used in data analysis. Results indicated a positive correlation between personal creative performance and a free, supportive, and innovative environment. Team support and organizational obstruction had less influence on personal creative performance. Compared with a traditional classroom, a synchronous environment added to innovative essence and helped learners do better in terms of novelty, feasibility, value, and creative product design overall.     

THE effect of Srandom DOPANT fluctuation on threshold voltage and drain current variation in junctionless nanotransistors

We investigate the effect of dopant random fluctuation on threshold voltage and drain current variation in a two-gate nanoscale transistor. We used a quantum-corrected technology computer aided design simulation to run the simulation (10000 randomizations). With this simulation, we could study the effects of varying the dimensions (length and width), and thicknesses of oxide and dopant factors of a transistor on the threshold voltage and drain current in subthreshold region (off) and overthreshold (on). It was found that in the subthreshold region the variability of the drain current and threshold voltage is relatively fixed while in the overthreshold region the variability of the threshold voltage and drain current decreases remarkably, despite the slight reduction of gate voltage diffusion (compared with that of the subthreshold). These results have been interpreted by using previously reported models for threshold current variability, load displacement, and simple analytical calculations. Scaling analysis shows that the variability of the characteristics of this semiconductor increases as the effects of the short channel increases. Therefore, with a slight increase of length and a reduction of width, oxide thickness, and dopant factor, we could correct the effect of the short channel.     

Generalization of the thermal model of infrared radiation sensors

In many theories and applications, generalized models can give a good head start for further research where the implementation of new elements and/or boundary conditions could become quite complex. In this paper the development of a compact thermal model of an infrared sensor will be presented. This thermal model includes not only the thermal resistances and capacitances of the sensor structure itself but the radiative and convective thermal resistances to the ambience and between the sensor plate and the heat source (thermal transfer impedance) which is important when the heat source and the sensor are in close proximity. Limitations and the applicability of the proposed model are also discussed. We also aim to present how the proposed model can be used for other IR sensor structures as well.     

A novel water-based epoxy coating using self-doped polyaniline–clay synthesized under supercritical CO2 condition for the protection of carbon steel against corrosion

The synthesis of a polyaniline–clay nanocomposite (PAniC NC) was achieved using the in situ polymerization of aniline in a Cloisite^® 30B nanoclay suspension in a supercritical CO₂ (Sc-CO₂) medium. The interfacial co-polymerization of aniline (ANI) and m-aminobenzenesulfonic acid (SAN) in the presence of Cloisite^® 30B was performed in Sc-CO₂/water to produce the SPANI-clay NC. The NC was then mixed with a water-based hardener. This water-based composite is developed with the goal of reducing environmental and health risks. The use of this Sc-CO₂ technique produced a composite material that resulted in the enhanced protection of carbon steel against corrosion when compared to a similar composite synthesized under atmospheric conditions. The materials obtained were characterized using UV/visible spectroscopy, X-ray powder diffraction and scanning and transmission electron microscopy. The anti-corrosion performance and the adhesion properties of these coatings were evaluated using standardized tests. Electrochemical impedance spectroscopy was also used to determine the electrochemical properties of these anti-corrosion coatings. Better exfoliation and dispersion of the clay was achieved using the Sc-CO₂ medium resulting in superior performances in corrosion and electrochemical tests because of the higher level of intercalation.     

Fundamental Evaluation of Power Supply and Rectifiers for Wireless Power Transfer Using Magnetic Resonant Coupling

This paper provides a fundamental analysis of a power supply and rectifiers for wireless power transfer using magnetic resonant coupling (MRC). MRC enables efficient wireless power transfer over middle‐range transfer distances. MRC for wireless power transfer should operate at a high frequency in the industry science medical band, such as 13.56 MHz, because the size of the transfer device decreases at higher transfer frequencies. Therefore, the output frequency of the power supply on the transmitting side should be 13.56 MHz. In addition, the rectifier on the receiving side is operated at a high frequency. This paper focuses on the reflected power in the power supply and rectifiers. Thus, the parametric design method is clarified for the power supply, including a low‐pass filter to match the output, the impedance of the power supply with the characteristic impedance of the transmission line. In addition, the effects on the rectifiers of silicon carbide and gallium nitride diodes are confirmed by performing an experiment and a loss analysis.     

A Restart Control Method for Position Sensorless PMSM Drive Systems Without Potential Transformer for Railway Vehicle Traction

This paper proposes a restart control method for position sensorless PMSM drive systems without a potential transformer for railway vehicle traction. This method can estimate the initial rotor speed and position under coasting conditions over the entire speed range. The method can also be used when the back‐EMF voltage is higher than the inverter DC link voltage. The proposed method is verified by experiments using a 200‐kW PMSM.     

Calculation of the Characteristics of Salient‐Pole Synchronous Machines Assisted by Permanent Magnets on the Basis of the Operating Principle

In this study we investigate a method for accurately calculating the characteristics of salient‐pole synchronous machines assisted by permanent magnets. First, the operating principle of the machines is investigated by using both finite element analysis and a simple magnetic circuit. Then, a theoretical representation of the assist effect on the permanent magnets is derived based on the magnetic circuit. Finally, the measured and calculated results are compared in order to confirm the validity of the proposed calculation method. We show that the load characteristics of the proposed machine can be accurately estimated from the no‐load and short‐circuit characteristics of the conventional machine without permanent magnets, and the size and magnetization of the inserted permanent magnets.     

基于信号增强的缓慢泄漏检测方法

目前管道泄漏检测方法可有效检测突发泄漏，对于缓慢泄漏则存在检测灵敏度低、定位不准确等问题。基于此，提出了一种基于信号增强的缓慢泄漏检测方法。通过信号压缩（抽取及移位）克服缓慢泄漏压力信号下降平缓的缺点；根据声波信号具有波形尖锐突出、对突发泄漏敏感的优点，通过建立以压力为输入、虚拟声波为输出的声波信号变送器模型，将压力信号转换为声波信号，克服了泄漏压力信号容易被淹没在管道压力波动及背景噪声中的缺点，实现了缓慢泄漏信号的增强；利用临近插值方法重构虚拟声波信号，基于延时互相关分析实现了缓慢泄漏的准确定位。实验结果表明，该方法具有显著的信号增强效果和定位精度，实现了缓慢泄漏的准确检测。